User Manual

JIC SERIES NON-METALLIC ENCLOSURES
OPAQUE, LIFT-OFF COVER WITH FOUR SCREWS
E62
www.hubbell-wiegmann.com
Data Subject To Change Without Notice
FEATURES-SPECIFICATIONS
Construction
• Hot compression molded fiberglass
reinforced thermoset polyester
• Poured polyurethane seamless
gasket provides watertight, dust-
tight environmental seal
• Recessed pan head screws –
no protruding surfaces
• 300 Series stainless used on all
external hardware
• Rounded edges, minimal protru-
sions or exposed pocket area for
accumulation of dust or debris
Industry Standards
UL/cUL 50/508, Types 1, 3, 4X, 6P, 12
CSA Standard C22.2 Types 1, 3, 4x, 6P, 12
NEMA Standard 250 Types 1, 3, 4x, 6P, 12
Temperature Range: -40°F to 250°F
(-40°C to 120°C)
Flammability Rating: UL94-5V
Non-flame propagating
Molded in flange for easy mounting
• Panel mounting capability for fixed
rear panel
• Raised bosses with brass inserts
accepting 10-32 screws for optional
panel mounting
• Stainless steel beaded cover reten-
tion chain
• Workable material cuts, drills,
punches and saws with ease and
accuracy
• Submersible, non-corrosive environ-
mental design
• Lift off cover
• Non-conductive, impact resistant,
UV resistant
• Smooth surface, no color variations,
swirls or color pockets, no voids
Access ories
See pages E77-E79
HW-J100805SC
CROWNED COVER MODEL SHOWN
Note: Subpanels must be ordered separately. Dimensions in inches (millimeters).
*Note: In crowned cover units, the center of the cover is raised 3/4". Crowned cover is available only in 10x8x5 size enclosure.
PART NUMBER
ENCLOSURE OVERALL
SIZE HxWxD
ENCLOSURE INSIDE
AxBxC
WT.
CARBON STEEL
SUBPANEL
FIBERGLASS
SUBPANEL
STAINLESS
STEEL SUBPANEL
ALUMINUM
SUBPANEL
JIC SERIES WITH OPAQUE, LIFT OFF, FOUR-SCREW COVER
HW-J60404SC
7.50 x 5.43 x 4.75
(191x138x121)
5.84 x 3.85 x 4.45
(148 x 98 x 113)
2.5 lbs. HW-MP604CS HW-MP604FG HW-MP604SS HW-MP604A
HW-J60604SC
7.50 x 7.50 x 4.75
(191x191x121)
5.72 x 5.72 x 4.45
(145 x 145 x 113)
2.75 lbs. HW-MP606CS HW-MP606FG HW-MP606SS HW-MP606A
HW-J80604SC
9.62 x 7.50 x 4.74
(244x191x121)
7.73 x 5.74 x 4.45
(196 x 146 x 113)
3.5 lbs. HW-MP806CS HW-MP806FG HW-MP806SS HW-MP806A
HW-J100804SC
11.62x9.41x4.25
(295x239x108)
9.73 x 7.73 x 3.98
(247 x 196 x 101)
5 lbs. HW-MP1008CS HW-MP1008FG HW-MP1008SS HW-MP1008A
HW-J100805SC
(crowned cover)*
11.62 x 9.37 x 5.06
(295 x 238 x 129)
9.73 x 7.73 x 4.83
(247 x 196 x 123)
5 lbs. HW-MP1008CS HW-MP1008FG HW-MP1008SS HW-MP1008A
HW-J121005SC
13.56 x 11.43 x 5.21
(344 x 291 x 132)
11.79 x 9.80 x 4.94
(299x249x125)
6.5 lbs. HW-MP1210CS HW-MP1210FG HW-MP1210SS HW-MP1210A
HW-J141206SC
15.50 x 13.50 x 6.25
(394 x 343 x 159)
13.53 x 11.55 x 5.94
(344 x 293 x 151)
8.5 lbs. HW-MP1412CS HW-MP1412FG HW-MP1412SS HW-MP1412A
HW-J161406SC
17.53 x 15.46 x 6.23
(445 x 393 x 158)
15.63 x 13.60 x 5.94
(397 x 345 x 151)
11.5 lbs. HW-MP1614CS HW-MP1614FG HW-MP1614SS HW-MP1614A
HW-J181608SC
19.62 x 17.61 x 8.82
(498 x 447 x 224)
17.69 x 15.69 x 8.45
(449 x 399 x 215)
19.25 lbs. HW-MP1816CS HW-MP1816FG HW-MP1816SS HW-MP1816A
HW-J201608SC
22.00 x 17.68 x 8.83
(559 x 449 x 224)
19.72 x 15.72 x 8.45
(501 x 399 x 215)
20.25 lbs. HW-MP2016CS HW-MP2016FG HW-MP2016SS HW-MP2016A
UL File E64791 CSA File 222873