Product Brochure

www.Hubbell-Wiegmann.com
4
WIEGMANN
POLYCARBONATE ENCLOSURES
ELECTRICAL PRODUCTS
A Division of Hubbell Incorporated (Delaware)
501 West Apple
Freeburg, IL 62243
TEL: [phone]
www.hubbell-wiegmann.com
DIMENSIONS (INCHES)
ENCLOSURE A X B C D E F G H I BACK PANEL SUB-PANEL
6 × 6 × 4 4.25 × 4.25 6.75 6.75 5.7 5.7 6.3 5 6.3 4.88 × 4.88 5.625 × 5.625
8 × 6 × 4 6.25 × 4.25 8.75 6.75 9.4 5.7 8.3 5 6.3 6.88 × 4.88 7.625 × 5.625
10 × 8 × 4 8.25 × 6.25 10.75 8.75 11.4 6.2 10.3 5.5 8.3 8.88 × 6.88 9.625 × 7.625
12 × 10 × 6 10.25 × 8.25 12.75 10.75 13.4 7.7 12.3 7 10.3 10.88 × 8.88 11.625 × 9.625
14 × 12 × 6 12.25 × 10.25 14.75 12.75 15.4 7.7 14.3 7 12.3 12.88 × 10.88 13.625 × 11.625
16 × 14 × 8 14.25 × 12.25 16.75 14.75 17.4 9.7 16.3 9 14.3 14.88 × 12.88 15.625 × 13.625
18 × 16 × 10 16.25 × 14.25 18.75 16.75 19.4 11.7 18.3 11 16.3 16.88 × 14.88 17.625 × 13.625
24 × 24 × 10 22.25 × 22.25 24.75 24.75 25.4 11.7 24.3 11 24.3 22.75 × 22.75 23.625 × 23.625
ENGINEERING PROPERTIES
TYPICAL PROPERTIES TYPICAL VALUES UNIT STANDARD
Flammability (resin/component) V-0 / 5V-A UL 94
UV-light F1 UL 746C
Enclosure Types
3R, 4, 4X, 6P, 12 /
IP66, IP67, IP68
UL 50 /
IEC 60529
Falling Dirt Impact (D 3029), 73°F 124 ft-lb ASTM D 3029
Izod Impact, unnotched, 73°F 60 ft-lb/in ASTM D 4812
Tensile Impact, Type “S” 250 ft-lb/in2 ASTM D 1822
HDT, 264 psi, 0.250", unannealed 270 ° F ASTM D 648
CTE, flow, -40°F to 200°F 3.80E-05 1/°F ASTM E 831
Flexural Stress, yld, 0.05 in/min, 2 in span 13100 psi ASTM D 790
Normal Temperature Range -20 to +240 (-20 to +115) °F (°C)
Volume Resistivity >1.E+17 Ohm-cm ASTM D 257
WIEG_BRO_005_0916_Poly_Carb_Products.indd 4 10/21/16 1:45 PM