User`s manual

WiebeTech LLC
R T X - I R U s e r ’ s M a n u a l - 35 -
Info
Fan restore Info: Fan <number> has been restored.
Error
Fan Fail Error: Fan <number> has failed.
Error
Fan non-exist Error: System cooling fan is not installed.
Error
AC Loss Error: AC loss for the system has been detected.
Info
Mgmt Lan Port Active Info: Management LAN Port is active.
Warning
Mgmt Lan Port Failed Warning: Failed to manage the system via the LAN Port.
Info
RTC Device OK Info: RTC device is active.
Warning
RTC Access Failed Warning: Fail to access RTC device
Info
Reset Password Info: Reset Admin Password to default.
Info
Reset IP Info: Reset network settings set to default.
System Config Events
Level
Type
Description
Info
Sys Config. Defaults Restored Info: Default system configurations restored.
Info
Sys NVRAM OK Info: The system NVRAM is active.
Error
Sys NVRAM IO Failed Error: Can’t access the system NVRAM.
Warning
Sys NVRAM is full Warning: The system NVRAM is full.
System Maintenance Events
Level
Type
Description
Info
Firmware Upgraded Info: System firmware has been upgraded
Error
Firmware Upgraded Failed Error: System firmware upgrade failed.
Info
System reboot Info: System has been rebooted
Info
System shutdown Info: System has been shutdown.
Info
System Init OK Info: System has been initialized OK.
Error
System Init Failed Error: System could be initialized in the last boot up.
LVM Events
Level
Type
Description
Info
VG Created OK Info: VG <name> has been created.
Warning
VG Created Fail Warning: Failed to create VG <name>.
Info
VG Deleted Info: VG <name> has been deleted.
Info
UDV Created OK Info: UDV <name> has been created.
Warning
UDV Created Fail Warning: Failed to create UDV <name>.
Info
UDV Deleted Info: UDV <name> has been deleted.
Info
UDV Attached OK Info: UDV <name> has been LUN-attached.
Warning
UDV Attached Fail Warning: Failed to attach LUN to UDV <name>.
Info
UDV Detached OK Info: UDV <name> has been detached.
Warning
UDV Detached Fail Warning: Failed to detach LUN from Bus <number>
SCSI_ID <number> LUN <number>.
Info
UDV_OP Rebuild Started Info: UDV <name> has started rebuilding.
Info
UDV_OP Rebuild Finished Info: UDV <name> has completed rebuilding.
Warning
UDV_OP Rebuild Fail Warning: Failed to complete UDV <name> rebuilding.
Info
UDV_OP Migrate Started Info: UDV <name> has started migration.
Info
UDV_OP Migrate Finished Info: UDV <name> has completed migration.
Warning
UDV_OP Migrate Failed Warning: Failed to complete UDV <name> migration.
Warning
VG Degraded. Warning: VG <name> is under degraded mode
Warning
UDV Degraded Warning: UDV <name> is under degraded mode.
Info
UDV Init OK Info: UDV <name> has completed the initialization.
Warning
UDV_OP Stop Initialization Warning: Failed to complete UDV <name>