User`s manual

WiebeTech LLC
R T X - I R U s e r ’ s M a n u a l - 13 -
5.2.7 If you are connecting from home to office
RTX-IR can also be used over the internet. If you are connecting to an RTX-IR at your office from home,
you will need to contact your IT administrator to set up a VPN client to log in to the office network. Once
you have logged in to the office network, you can access the RTX-IR just as if you were actually at your
office (see section 5.2.4 or 5.2.5, depending on how your office network is configured).
5.2.8 If you are connecting from office to home
Most home networks are configured with a router to allow multiple computers to share an internet
connection. In this case, you will need to set up your router to forward port 3260 to the RTX-IR. This
process varies depending on the router you are using, so consult your router’s user documentation or
contact the manufacturer if you have difficulties. The iSCSI initiator should be set to contact the public IP
address of your cable modem.
Chapter 6: Using the GUI
You will use the web browser-based GUI to set up a RAID and create logical volumes on the RTX. After
accessing the GUI (see step 5.2), the GUI’s main page should load, displaying a picture of the RTX with
several options to the left. When you click on any option, you will be prompted for a user name and
password. The user name is "admin" and the default password is "1234."