Technical information

WiebeTech LLC
R T X 4 0 0 - U R & R T X 6 0 0 - U R U s e r ’ s M a n u a l - 3 -
3. (Optional) Install a SCSI host bus adapter (HBA) into an empty expansion slot inside your
computer. If your computer already has a SCSI port, you can skip this step. The following general steps
will work for most cards. Instructions for individual cards may vary, so consult your host card’s user
manual.
a) Power down the computer system.
b) Insert the card into an available slot. Do not force it, but it will take firm
pressure to insert it. Gently rocking the card into place may help.
c) Make sure the card is fully seated in the slot. Secure with a screw.
d) Turn the computer back on.
e) Install the appropriate software drivers for the card. The driver files are
usually found on an accompanying CD or on the manufacturer’s website.
Hardened Bay
Key lock
Ejection handle
Power LED
Access LED
Standard Bay
Key lock
Ejection handle
Power LED
Access LED
Basic Bay
Ejection handle
Power LED
Access LED
Rear Panel
Ethernet Port
(configuration only)
Infiniband
Expansion
(400 models only)
RS-232
SCSI Ports
8cm Fan
Power Switch
Power Outlet
All RTX TrayFree Bays accept 1TB SATA
drives, have power and access LEDs, and
connect to the host via a SATA connection.
WARNING: Do not block the ventilation
fan during operation. Overheating may
damage the device or hard drives.