User`s manual
CRU-WiebeTech
R T X 4 0 0 - Q R U s e r ’ s M a n u a l - 15 -
8. Technical Specifications
Product name/code:
RTX400-QR (31310-0000-0030)
Raid Levels Supported:
0, 1, 3, 5 and 10
Host Interfaces:
2 - 1394b (FireWire 800): up to 800Mbs
1 - 1394a (FireWire 400): up to 400Mbs
1 - USB 2.0: up to 480Mbs
1 - SATA 3.0GHz (up to 300MB/sec)
Bridge Type: UF936QSE
Data
Interface
Speeds:
SATA 1.5GHz (up to 150MB/sec)
Drive Types Supported:
3.5” SATA hard drives up to 1500GB (1.5G or 3.0G compatible)
Hot
-
Swappable Trays
:
Yes
Software
:
WiebeTech Configurator 2.0
System Detection
:
Hard Disk failure sensors
Cooling fan failure sensor
RAID failure detection
SMART status detection of hard drives
Controller Display
:
LCD screen with yellow backlight/control panel
Operating
System
Requirements:
Windows XP (2.2TB limit) and Vista
Mac OS X
Linux distributions that support FireWire
Operating Temperature:
50 – 85° Fahrenheit (10 – 30° Celsius)
Operating Humidity:
5% to 95%, noncondensing
Power Switch:
2 position: On / Off
Power Supply:
120W Auto-switching PRT PSU
Cooling Fan:
Dual 6cm Fans
Safety Certification:
CE/FCC
External Material:
Aluminum
Shipping Weights:
13lbs sans drives
18lbs with drives
Dimensions:
270mm (L) x 174mm (W) x 213mm (H)
Warranty:
3-year limited warranty. See warranty statement for details and limitations.
WiebeTech offers free phone support for 90 days after purchase (1-866-
744-8722). After 90 days, email support is available at
support@wiebetech.com.
RTX400-QR and TrayFree are trademarks of CRU-DataPort. Other marks are the property of their respective
owners.
© 2008 CRU-DataPort. All rights reserved.
FCC Compliance Statement: “This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This
device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired
operation.”
In the event that you experience Radio Frequency Interference, you should take the following steps to resolve the problem:
1) Ensure that your unit is plugged into a grounded electrical outlet.
2) Use a data cable with RFI reducing ferrites on each end.
3) Use a power supply with an RFI reducing ferrite approximately 5 inches from the DC plug.
If you have any questions or problems, please contact support@wiebetech.com for technical support. If you are
interested in purchasing more WiebeTech products, check our website or contact sales@wiebetech.com. We
appreciate being able to serve you!
Tested to comply
with FCC standards
FOR HOME OR OFFICE USE