User manual

WiebeTech
C o n fi g u r a t o r 3 . 0 U s e r ’ s M a n u a l A 9 -0 0 0 - 0 0 2 7 R E V 1 . 0 - 8 -
4. Frequently Asked Questions (FAQ)
Q: What should I do on a reboot when RTX400-QR prompts me to “Re-init” the RAID?
A: Short answer: Do not do anything unless you wish to erase all data and re-initialize the RAID. After a
few seconds, the message will disappear and the RTX400-QR will finish booting up.
Longer answer:
If you bought RTX400-QR without drives and you want to create a RAID 5 with 4 disks (default RAID
type) then simply insert your drives, turn on RTX400-QR, and select the “Re-init” (left) button on the front
display when prompted. RTX400-QR will verify the RAID 5 with 4 disks and you can select the “-Init” (left)
button on the front display to set up that RAID.
If you desire a different RAID type or disk number refer to section 3.3 (“RAID Tab”) in this user’s manual
for further instructions.
If you are simply rebooting the unit and want to return to the “Active Menu” then let RTX400-QR complete
the start up cycle and it will arrive at the “Active Menu” momentarily. Do not press any buttons on the
front display.
Q: I changed the fan kick-on temperature to a higher value, but the fan comes on at a lower temperature
than I set. Why?
A: If any temperature threshold is reached, and the amber or red LEDs come on, the fan will kick on to
cool the unit down. This is to help protect your hard drives and data from damage due to overheating.