User manual

WiebeTech
C o n fi g u r a t o r 3 . 0 U s e r ’ s M a n u a l A 9 -0 0 0 - 0 0 2 7 R E V 1 . 0 - 2 -
1. Requirements
Operating System: Windows XP/32, Vista/32 and Vista/64, Windows 7/32 and Windows 7/64, or Intel
Macs running OS X 10.5 or 10.6
Connections: FireWire 400 (1394a), FireWire 800 (1394b), or USB only
Products: RTX400-QR, RTX220-QR and other WiebeTech products that use an Oxford 93x chipset
2. Installing Configurator 3.0
Configurator 3.0 can be found on our webpage (http://www.wiebetech.com/software/configurator.php) or
on the WiebeTech Product CD in the WiebeTech Extras folder.
• To install from the web go to the webpage and select the download that’s compatible with your
operating system.
• To install from the Product CD open the folder called WiebeTech Extras, then open the folder called
Configurator. Both Mac and Windows versions will be in this folder, so simply select the appropriate
file and follow the installation instructions.
2.1 Windows Installation
If you’ve chosen the Windows version of Configurator 3.0 a Setup Wizard will appear on your screen.
Click “Next”. After you click “Next” it will take you to a licensed agreement for installing this software.
Read over the agreement and select “I accept the agreement”, then click “Next”. The Setup Wizard will
automatically create folders for Configurator. If you would like to install it in a different folder on your
system that’s acceptable, just click “Browse” and select a new location. Once you’ve decided on where to
store the software click “Next”. Shortcuts will automatically be installed in the Start Menu under a
subfolder called WiebeTech. Again, if you’d like to install this in a different area select “Browse” and
choose a different location. After you’ve decided on where to store the program’s shortcuts click “Next”.
Then you can opt to have a desktop icon installed. Make your selection and click “Next”. After that the
wizard will prompt you to install the software and will give a brief recap of the different selections you
made. Click “Install” and let the wizard complete your installation. Finally, you can choose to launch
Configurator now. Click “Finish” and open up Configurator 3.0.
2.2 Mac Installation
If you’ve chosen the version of Configurator 3.0 a License Agreement will appear on your screen. You
can select “Agree” and run Configurator straight from the source, or you can select “Save” and save the
software to your Mac. WiebeTech recommends saving it to your Mac as well as placing an icon on your
desktop for future use.
3. Using Configurator 3.0
Open Configurator 3.0. A reminder will appear telling you to disconnect all other FireWire and USB
devices. Be sure to do that and then select “Continue”. If configuring a RAID on RTX220-QR you can
have your drives loaded inside of the unit, otherwise, disconnect any hard drives that are attached to your
product. When Configurator 3.0 appears you can power on your unit.