User`s manual

WiDRIVE DX-325 User’s Guide

Understand the LED indicators

Indicator Status Indicaon

Power on Green

Boong up Flashing between orange and green

System ready Green

Shung down Flashing between orange and green

Not ready Flashing between orange and green

WiFi ready Green

WiFi on work Flashing green

LAN port plugged in Green

Data transferring Flashing green

Data transferring Flashing between orange and green

Power on Your WiDRIVE

Press the Power buon to power on your WiDRIVE.

Shutdown Your WiDRIVE

Normal shutdown

You can click Shutdown buon on Maintenance page in web control or shortly press the Power

buon to normal shutdown your WiDRIVE.

Force shutdown

Long press the Power buon to force shutdown your WiDRIVE.

Noce!

Performing force shutdown might cause potenal data damage to HDD installed in your WiDRIVE.

Mode Selection

You can connect your device with WiDRIVE in three ways: Access Point (AP) mode, Client Scan

mode, and USB mode.

Access Point (AP) Mode

Your WiDRIVE performs as a wireless storage router in AP mode.

Slide the mode switch down and power on your WiDRIVE.

Connect WiDRIVE and router/modem with an ethernet cable, and then

wirelessly connect your PC to WiDRIVE (See “AP Mode Setup” on page 6 to

setup AP mode).