User`s manual

WiDRIVE DX-325 User’s Guide

Fixed IP Address

Fill these three entries if a stac connecon method is used.

WiDRIVE Client Scan Mode Seng

Click on the Client Scan mode icon in the [Select Setup Mode] secon to enter the Client Scan Mode

Seng page.

You can setup up to 3 preferred wireless networks. When you connect your WiDRIVE in Client Scan

mode, it automacally connects to available networks in the order of your router seng.

1. If your WiDRVE is in Client Scan mode, it detects wireless signals around and list them down for

your selecon. Simply click on the selected wireless signal. If your WiDRIVE is in AP Mode, skip this

step.

2. If your WiDRVE is in Client Scan mode and a wireless signal has been selected, click on Apply

buon of the router, the informaon will be imported and all you have to do is to enter the security

key. Otherwise if your WiDRIVE is in AP Mode, type all required informaon for the setup.