User`s manual

WiDRIVE DX-325 User’s Guide

• Advanced seng

Click on “Click Here” for advanced sengs. The [WiDRIVE WAN Seng] pops up.

WiDRIVE Wireless Seng:

Congure your wireless network of WiDRIVE.

SSID

This is the wireless network name of your WiDRIVE. It must be idencal

on all points of the wireless network and cannot exceed 32 characters.

Security

• If you select “None” from the dropdown bar, your wireless network

transfers data without safety encrypon.

• Otherwise select a security rule and then enter the password to enable

the security protecon. The security capability from basic to strict:

WEP 64 bit WEP 128 bit WPA WPA2 WPA+WPA2

Channel

• Select Auto from dropdown bar, your WiDRIVE automacally switches

to the best channel available.

• Otherwise you can manually assign a channel to your WiDRIVE.

Wireless Mode

• 802.11 b/g mixed: select if your use 802.11 b and 802.11 g devices.

• 802.11 b/g/n mixed: select if your use 802.11 b, 802.11 g, and 802.11 n

devices.

• 802.11 n only: select if your devices are 802.11n.

WiDRIVE Internet Seng:

Congure how your WiDRIVE connect with the internet.

Auto IP Assign

This is the default seng. Your WiDRIVE obtains IP from a DHCP server.

DSL (PPPoE)

Choose PPPoE (Point to Point Protocol over Ethernet) if your ISP uses a

PPPoE connecon.