User`s manual

WiDRIVE DX-325 User’s Guide

ii. Le-click “View Wireless Networks“ buon.

iii. Select “WiDRIVE“ to connect.

5. Now you can open the web browser with WiDRIVE IP address (default: hp://192.168.2.1). See

“WiDRIVE Web Control” on page 11 for operaon guide.

Note!

See “WiDRIVE AP Mode Seng” on page 20 to congure AP mode.

Client Scan Mode Setup

In Client Scan mode, your device connects to WiDRIVE with an ethernet cable. Your WiDRIVE performs

as a wireless adapter:

1. Slide the mode switch to Client Scan mode.

2. Connect your device to WiDRIVE with an ethernet cable.

3. Connect the power cable to your WiDRIVE and power on your WiDRIVE.

4. Open web browser with WiDRIVE IP address (default: hp://192.168.2.1). See “WiDRIVE Web

Control” on page 11 for operaon guide.

Note!

See “WiDRIVE Client Scan Mode Seng” on page 22 to congure Client Scan mode.

Note!

For connecng your WiDRIVE to a WiFi router, see “Quick Connecon” on page 16 for operaon guide.

CLIENT SCAN

Internet