User guide

Setting up Wideye Sabre 1 with BGAN LaunchPad Page 27
12 Setting up caller ID
You can enable caller ID if you want to see the number of an incoming caller, or allow a caller to
see your number.
To set up caller ID:
a. Select BGAN services > Telephony Settings: (or click on Advanced in the Phone window).
The Telephony Settings window displays.
b. Select the Caller ID tab. The following window is displayed:
c. Check Allow Called Party to see your number if you want to allow the caller to see your
number.
d. Check Show alert with calling party number for incoming calls if you want to see the
number of an incoming caller.
e. If required, click on Current Values to display the current network settings for this service.
Click on Apply to save the displayed configuration, and select another Telephony settings
tab, click on Save to save the displayed configuration and exit the Telephony settings
screen, or click on Cancel to exit without saving.