Specifications

towards the direction of
the Satellite. Adjust the
antenna to point in the
direction of maximum
signal strength.
Disable the rest of the LAN
connections except the one
SABRE™ I. Retry after
SABRE™ I.
Ensure the Ethernet cable
is securely tightened and
SABRE™ I to retry.
Ensure the correct upgrade
package/file is selected.
Retry after restarting
SABRE™ I
Turn on SABRE™ I and select
New GPS to obtain new GPS
fix. Point SABRE™ I’s antenna
such that it has clear view to
the open sky.
If SABRE™ I is placed at an
unobstructed open area,
then it is recommended to
make it lay flat facing the
sky to obtain GPS fix quickly.
If SABRE™ I is placed
near window, then it is
recommended to place it at
about 45 elevation angle
facing the clear sky to obtain
a new GPS fix.
4.
5.
6.
Unable to start firmware
upgrade with SABRE
TM
I
or
Time out when transferring
file to SABRE
TM
I during
firmware upgrade
Presence of other LAN
(Ethernet/wireless)
connections
The Ethernet cable is loose
Incorrect upgrade package
/file is selected.
The stored GPS position is
outdated (when SABRE™ I is
not used for very long time)
or the GPS position is not
matching with the current
geographic location (this is
true especially if SABRE™ I
was moved from one place
to another place which is far
away (e.g., 10 km or more)
Fails to transfer file to
SABRE
TM
I during firmware
upgrade
71
SABRE™ I is registered to
network but fails to make
any voice call or data
connection.