Specifications

II. Operation

i. Connect up the external battery and cable accessories as shown in the above setup.

1) Attach the power tip of the AC adapter to the charging port of the battery pack.

2) Insert the AC Plug into the wall outlet.

3) The charging indicator will be Red during charging and turn Green when charging completes.

Note: Do not let the battery pack supply power to SABRE™ I when the battery pack is undergoing

charging. This will increase charging efficiency and completes charging in a shorter time.

b)Using the Secondary Battery Pack

i. Press the “Power” switch button on the battery pack and check the LED Indicator. If only one light

is on or no light is on please charge the battery pack first (See charging the Secondary Battery Pack).

ii.

a) Charging the Secondary Battery Pack:

FIGURE 5.5-2: Setup for charging the Secondary

Battery Pack

AC adapter

Set

Charging port of the battery pack with the

power tip of the AC adaptor plug into it.

Converter

Tip

Output

Cable

DC Supply output with

output cable attach to it

FIGURE 5.5-3: Setup for using the Secondary Battery

Pack to supply power to SABRE™ I