Specifications

Appendix 1
Technical Specifications
User Interface
Inmarsat LaunchPad
LCD display on SABRE
TM
I
CTP Handset (optional)
The Inmarsat LaunchPad SABRE™ I software driver
and related software are contained in the product
CD included with the SABRE™ I . This software
allows SABRE™ I to be accessed via a PC or laptop.
Functions supported by LaunchPad are as follows:
- System Setup: Assists the user in accurately
pointing the terminal at the Inmarsat-4 satellite
for maximum signal strength.
- Data streaming at selected rates.
- Telephony
- Security settings
- Data logging
- SMS
- GPS
- Network Services
- Usage tracking
The built-in Man Machine Interface (MMI) is designed
with 4 navigation buttons and an LCD to facilitate
its operation
Functions supported by the SABRE™ I MMI (or now
known as LCD) are as follows:
- Assists the user in accurately pointing the terminal
at the Inmarsat-4 satellite for maximum signal
strength
- If a GPS fix cannot be obtained, it allows the user
to use the last-stored GPS fix.
- Dial contacts that are available on the SABRE™ I
phonebook and SIM phonebook, and to view the
call history
- Make an emergency call
- Define PIN lock
- Configure the Ethernet interface of SABRE™ I to
operate in IP Mode, which allows the user to
connect to the Internet without using the
computer to perform authentication
- Configure the built-in DHCP server
- Configure the Bluetooth access point and to pair
the SABRE™ I with Bluetooth devices
- Configure CallerID standard
- Call feature configuration
- Terminal configuration
- Display configuration for the built in LCD display
- Tone Configuration for the SABRE
TM
I Terminal
- Language selection for the SABRE
TM
I Terminal.
Wideye Bluetooth Handset (optional) Support
instructions over the Bluetooth air interface to
perform configuration and functions via the optional
wideye Bluetooth Handset.
50