Specifications

IX.
X.
d)For Static, user may edit the primary and
secondary DNS IP addresses.
e)To edit the Primary and Secondary DNS IP
addresses, select Static > Primary or Secondary
DNS IP addresses. Select Edit to make changes
to the addresses. After editing, select Save to
save the new Primary or Secondary DNS IP
addresses.
f) Set option of connect, select Options >
Automatic or Manual.
g)Select Connect to initiate the Ethernet
connection or Disconnect to terminate the
Ethernet connection.
Ethernet DHCP Server Configuration.
From Interfaces Settings, select Ethernet > DHCP
config. Continue with the following:
a)Select Start to start the DHCP server.
b)Select Stop to stop the DHCP server.
c) To configure Start & End IP addresses, select
IP address. The LCD display will show the
current Start & End IP addresses, select Edit to
make changes to the Start & End IP addresses.
After editing, select Save to save the new Start
or End IP addresses.
d) To configure the Lease Time, select Lease Time.
The LCD display will show the current Lease
Time, select Edit to make changes to the Lease
Time (from 0 to 43200 seconds), after editing,
select Save to save the new Lease Time.
Note: Start and End IP addresses – These are the
IP addresses that will be assigned by the DHCP
server to the laptops and computers that are
connected to SABRE™I. Note: Lease Time – This
refers to the connection time of the IP connection.
Local IP address Setting
a) From Interfaces , select Ethernet > Local IP
address. Continue with the following:
i. To set the Local IP address, select Set IP
address. The LCD display will show the
current Local IP address, select Edit to make
changes to the Local IP address. After editing,
select Save to save the new Local IP address.
ii.Select Subnet Mask and LCD will display
current Subnet Mask.
44