Specifications

I.
II.
III.
IV.
V.
I.From the LCD, use the Up/Down buttons to select
Menu > Settings > Interfaces > Ethernet >
Connectivity > and Press ENTER
Use the Up/Down buttons to select Options >
Automatic if you need an automatic Data connection
after reboot and Press ENTER.
Select Options > Manual if you want to make the
connection manually at the time you need it.
Use Connect or Disconnect to activate or deactivate
a data connection respectively.
If Options > Automatic is selected, unplugging and
re-plugging the Ethernet cable will also activate the
Data connection.
Select Obtain an IP address automatically and Obtain DNS server address automatically and click OK.
IV.
Close all the windows.V.
4.5.2.3 Proceed with the following steps to active a Data connection:
FIGURE 4.5.2.3-1: LCD Display of SABRE™ I showing
that a successful IP connection has between
established after network parameter configuration.
41