Specifications

Note:
It takes approximately 3 hours to fully charge the battery.
The charging time will be longer when SABRE™ I is switched ON during the time when the battery is undergoing charging.
An icon to show that the Primary Battery of SABRE™ I has completed charging while SABRE™ I is non-operational (switched off).
An icon to show that the Primary Battery of SABRE™ I is undergoing charging while SABRE™ I is non-operational (switched off).
3
Setting Up The SABRE
TM
I
3.3 Charging The Battery
Insert the Power Adapter connector fully into the
Power socket.
Do not remove the battery from the SABRE
TM
I
during charging.
FIGURE 3.3-1: Figure showing the position
of the Charger socket on SABRE™ I.
Power
socket
AC/DC Power
Adapter
connector
Insert the SIM card (gold-contacts facing the left as
shown in Figure 3.1-1) into the SIM slot. Ensure the
SIM card is inserted in the position as shown.
(To remove SIM card, press on the SIM card and
remove from the slot.)
FIGURE 3.1-1: Figure showing the location
of the SIM Card in SABRE™ I.
3.1 Inserting The SIM Card
SIM Card
FIGURE 3.2-1: Figure showing the installation position of the Primary Battery.
3.2 Installing The Battery
Battery
12