User Manual

32 33
POSITIONING THE HEARING AID AND CUSTOM
EAR-TIP
Insert the custom ear-tip into the ear canal while
holding the lower part of the tubing. It may also help
to pull the outer ear backwards and upwards with
the opposite hand.
Place the hearing aid behind the ear, so that the tub-
ing rests comfortably on the ear, close to your head.
THE ANCHOR
With the custom ear-set solution only 2 mm of the
anchor is used.
Trim the anchor so there is ap-
proximately 2 mm left. It is im-
portant to leave the 2 mm intact
as it helps keep the custom ear-
tip correctly positioned.
The tubing should look like this when
you have trimmed the anchor.