Operation Manual

28 29
Removing the used wax guard
Wipe away any visible wax from the shell of your
hearing instrument. The used wax guard is in the
stainless steel bushing around the sound outlet.
With the grey holder perpendicular to the sound
outlet, insert the removal hook into the used wax
guard so that the shaft of the holder is touching
the rim of the wax guard, then slowly pull the
wax guard straight out. There is no need to dig
or twist the wax guard from the bushing.
A. Vent opening
B. Sound outlet
C. Used wax
guard
A.
B.
C.
Inserting a new wax guard
Now turn the grey holder around so that the used
wax guard is away from the instrument and the
new one is in position to be inserted into your
hearing instrument.
Gently press the new wax guard straight into the
opening of the sound outlet. Do not force the wax
guard into the sound outlet. The outer ring of the
wax guard should sit flat on the stainless steel
bushing.