User's Manual

ezWAVE Access Point Users’ Guide Version 1.6

Page 32 of 50

All the Access Points of Widelink have the same default IP address; 211.189.201.251.

If you install the Access Point for the first time, you should type Widelink Access Point’s

default IP on the above IP address input dialog box and then press CONNECT button.

If the Access Point has no problem and wire/wireless link is connected without problem.

Dialog box pop up to show that the Access Point Manager program is connected to the

Access Point through its IP address.

Otherwise if the Access Point Manager program is not able to find the Access Point,

then following message is displayed and it will stop the search process.

If the Access Point connection fails, verify that you have correctly installed the AP. And

if the AP still fails to connect, refer to troubleshooting chapter.

Access Point Connection