User's Manual

ezWAVE Access Point Users’ Guide Version 1.6

Page 23 of 50

If you use Widelink ezWAVE WAP-1100E as a normal Access Point, select ‘1’.

Otherwise, you use it as a point-to-point transmission device you should select ‘2’or‘3’.

This usage/process’s detailed explanation will be followed on next chapter.

If you know which IP address should be set to your Access Point, then write it in this step.

Otherwise if you do not know which IP to be used, ask your network administrator about

available IP address. In this example, the IP address 100.100.100.100 is a default IP

address that is assigned by Widelink.

 RETURN