User`s manual

Issued Date
Revision Status
Title
Page No.
9 / 44
V2.2
2009-2-20
IDP2310UX
(AL23PUX)
1.1.3 Input Signal Specifications
 IDP2310UX provides maximum five (5) input signal interfaces, 2 x Analog (BNC,D-sub) Input ,1x Digital Input,
1xCVBS input and 1xS-video.
 Standard input resolution is UXGA (1600 x 1200 pixels)
 Other resolutions are supported as specified below. No scaling is provided for input signals with resolutions
less than the standard input resolution 1600x 1200 pixels.
Resolution
Hsync
(KHz)
Vsync
(Hz)
VGA 640 x 480
31.0 - 43.0 60.0 - 85.0
SVGA 800 x 600
35.0 - 53.7
56.0 - 85.0
XGA 1024 x 768
48.4 - 68.3 60.0 - 85.0
SXGA 1280 x 1024
64.0 – 91.2 60.0 - 85.0
UXGA(analog) 1600 x 1200 75.0 – 93.8 60.0 - 75.0
UXGA(digital) 1600 x 1200 75 60.0
- Specified support resolutions
Resolution H-Frequency (kHz)/(polarity) V-Frequency(Hz)/(polarity)
1600x1200(digital)
75(+) 60(+)
1600x1200(analog)
93.75(+) 75(+)
87.5(+) 70(+)
81.25(+) 65(+)
75(+) 60(+)
1280x1024
91.146(+) 85(+)
79.976(+) 75(+)
63.981(+) 60(+)
1024x768
68.667(+) 85(+)
60.023(+) 75(+)
56.476(-) 70(-)
48.363(-) 60(-)
800x600
53.674(+) 85(+)
46.875(+) 75(+)
48.1(+) 72(+)
37.879(+) 60(+)
35.1(+) 56(+)
640x480
43.269(-) 85(-)
37.5(-) 75(-)
37.7(-) 72(-)
31.469(-) 60(-)
720x400 31.469(-) 70(+)
1.1.3.1 Analog Input
 Analog RGB input signal shall be as follows:
 Video Signal Level: 0.714 Vp-p nominal
 Video Signal Polarity: Positive (Black to White). Polarity is detected automatically.
Both 0 V to +0.714 Vp-p and -0.714 V to 0 Vp-p is allowed.
 Video Input Impedance: 75 Ohm terminated (RGB Video Signal)
 Sync: TTL voltage levels, External Separate H & V Sync.
 Interlace: Non-interlaced
1.1.3.2 Input Selection
In case multiple input source is connected, input to be displayed can be selected by: