User`s manual

Issued Date
Revision Status
Title
Page No.
30 / 44
V2.2
2009-2-20
IDP2310UX
(AL23PUX)
3.3.1.4 V.POSITION
3.3.1.5 SHARPNESS
The function is able the user to adjust vertical position of the display.
“V-Position” is the submenu of “Adjustment”, which controls the vertical position of image, Its
adjustment range is 0 to +100 and default is 50. When the V-position of the submenu of “Analog
adjustment” is selected, the select button push to select it. so that adjust the values of the
V-position. When the encoder switch pushed , going to the upper menu.
Adjusting the V-position shifts the vertical position of image. If the value of “V-position” is
increased or decreased by pressing “◀ and ▶”, the “V-position” shifts the upper or the lower.
The function is able the user to adjust sharpness for the display
Closer to 0 Original Closer to 100
“Sharpness” is for making a clear image. Its adjustment range is 0 to +100. When it is 100, the
image is the most clear. When it is closer to 0, the image is blurred. This is not the absolute value
on all signals. It may differ from every signal because the original source quality is very various. If
the original signal is good quality, the image may be looked rather artificially than clearly in max.
value 100. In this time, the value should be adjusted to lower value. If the original source is poor
quality, the image becomes clearly more by adjusting closer to 100. The default value is 50.