User`s manual

Issued Date
Revision Status
Title
Page No.
11 / 44
V2.2
2009-2-20
IDP2310UX
(AL23PUX)
 Standard: IEC type connector
1.1.7.2 Input signal connectors
 Analog Input: 5 Coaxial BNC connectors for R, G, B, HS and VS
 Digital input: DVI-D connectors
 CVBS input: RCA connectors
 S-video input: 4pin mini DIN connectors
1.1.7.3 Interface connectors for remote control
 RS-422 port: Sub D, 9p, Female (for JH protocol)
 RS-232 or RS-485 port: Sub D, 9p, Female (for JH protocol)
 RS-485 port: Sub D, 9p, male (for Inter-Monitor communication)
1.1.8 Connection & PIN Assignment
Power Input / output
Analog Input (BNC)
Analog Input (D-Sub)
● 90-264Vac, 47~63Hz with double pole / neutral fusing,
250V F3.15AL
● Disconnect power before changing fuse
● Chain thru power output to limit to one level totally
● R : Analog Red Signal Input (0.7 Vpp, 75 ohm)
● G : Analog Green Signal Input (0.7 Vpp, 75 ohm)
● B : Analog Blue Signal Input (0.7 Vpp, 75 ohm)
● HS : Horizontal Sync Signal Input (TTL)
● VS : Vertical Sync Signal Input (TTL)
● Connection Type : 5 x BNC
● Connection Type : 15p D-aub Female (Analog only support)
1. Red
2. Green
3. Blue
4. Ground
5. DDC Ground
6. Red Ground
7. Green Ground
8. Blue Ground
9. back up
10. sync Ground
11. Ground
12. DDC Data
13. H sync
14. V sync
15. DDC Clock