User manual

Wide Bank 28 DS3 - Release 2.4 47
Alarm and Event Message Parameters
* This table lists default values for the alarm severity Notification Codes. Many of the Condition Types can be
assigned a different alarm severity with the SET-ATTR-{T3|T1|E1|ENV} command. See Wide Bank 28 DS3
User Manual for additional information.
EXT48V-{A,B} REPT ALM ENV MN PWR-48 Power -48V Fail or Low
FAN-{A,B} REPT ALM ENV MJ CLFAN Cooling Fan Fail
FAN-A&FAN-B REPT ALM ENV MJ CLFAN Fan Faceplate Not Present
POWER-5V-
{A,B}
REPT ALM EQPT MN NSA PWR Power +5V Fail
SECURITY REPT ALM SECU MJ NSA LOGBUFR90-
SECULOG
TL1 Security Log 90% Full
MJ NSA LOGBUFROVFL-
SECULOG
TL1 Security Log Full
TEMP-{A,B} REPT ALM ENV MN HITEMP High Temp
Unit Identifier
<uid>
SECU MN NSA INTRUSION
Access
Identifier
Report
Message
Type
Interface
Type
Default
Notifi-
cation
Code *
Service
or Con-
dition
Effect
Code
Condition Type Condition Description