User manual

Wide Bank 28 DS3 - Release 2.4 41

Retrieve Alarms

The following shows how to retrieve the current alarms for a facility.

RTRV-ALM-EQPT:tid:aid:ctag::[ntfcncde],[condtype];

RTRV-ALM-ENV:tid:aid:ctag::[ntfcncde],[condtype];

RTRV-ALM-E1:tid:aid:ctag::[ntfcncde],[condtype];

RTRV-ALM-T1:tid:aid:ctag::[ntfcncde],[condtype];

RTRV-ALM-T3:tid:aid:ctag::[ntfcncde],[condtype];

RTRV-ALM-ALL:tid:aid:ctag::[ntfcncde],[condtype]

Example Command

Retrieve ALL alarms RTRV-ALM-ALL;

Retrieve T3 major alarms RTRV-ALM-T3:tid::::MJ,;

Retrieve T1 #3 alarms RTRV-ALM-T1:tid:DS1-03;

Retrieve EQPT alarms RTRV-ALM-EQPT;

Facility AID

EQPT ALL

ENV ALL

T3 DS3-A, DS3-B, or ALL

T1 DS1-1 to DS1-28, or ALL

E1 E1-01 to E1-27, or ALL (see T3-E1 Configuration AIDs on page 8)

ALL ALL

Keyword Description

ntfcncde Severity or class of alarm, event or condition (optional). If omitted, the default

is ALL. Values are:

• CR – Critical Alarm

•MJ – Major Alarm

• MN – Minor Alarm

• CL – Condition Cleared

• NA – Not Alarmed

• NR – Not Reported

•ALL

condtype Type of condition or state to be retrieved (optional). If omitted, the value

defaults to ALL. To retrieve specific condition type values, see Alarm and

Event Message Parameters on page 43.