User manual

40 Wide Bank 28 DS3 - Release 2.4

Retrieve Condition

The following shows how to retrieve the current condition of a facility.

RTRV-COND-T3:tid:aid:ctag::[typereq];

RTRV-COND-T1:tid:aid:ctag::[typereq];

RTRV-COND-E1:tid:aid:ctag::[typereq];

RTRV-COND-EQPT:tid:aid:ctag::[typereq];

RTRV-COND-ENV:tid:aid:ctag::[typereq];

RTRV-COND-ALL:tid:ALL:ctag::[typereq];

Example Command

Retrieve T3 facility RTRV-COND-T3:tid::ctag;

Retrieve E1 facility 5 RTRV-COND-E1:tid:E1-05:ctag;

Retrieve T1 facility 3 RTRV-COND-T1:tid:DS1-03:ctag;

Retrieve All T1 facilities

Note: Expect a delay while

information is being prepared.

RTRV-COND-T1:tid::ctag;

Retrieve EQPT facility RTRV-COND-EQPT:tid::ctag;

Retrieve ENV facility RTRV-COND-ENV:tid::ctag;

Retrieve ALL facilities

Note: expect a delay while

information is being prepared.

RTRV-COND-ALL:tid::ctag;

Facility AID

EQPT ALL

ENV ALL

T3 DS3-A, DS3-B, or ALL

T1 DS1-1 to DS1-28, or ALL

E1 E1-01 to E1-27, or ALL (see T3-E1 Configuration AIDs on page 8)

ALL ALL

Keyword Description

typereq Type of condition or state to be retrieved (optional). If omitted, the value

defaults to ALL. To retrieve specific condition type values, see Alarm and

Event Message Parameters on page 43.