User manual

24 Wide Bank 28 DS3 - Release 2.4

E1 Circuit Configuration

1. Retrieve Current E1 Configuration

RTRV-E1:tid:aid:ctag;

Example: Retrieve configuration for E1 #1.

RTRV-E1:tid:E1-01:ctag;

Response: tid 2001-08-04

11:47:18

M ctag COMPLD

"E1-01::AISF=Y,CMDMDE=FRCD,DLCID=E1 1,

FLMDE=BOTH,FMT=UNFR,IDLE=AIS,LINECDE=HDB3,

OMODE=NORM,RVRTFLAG=UNLCKD:IS-EQ,NALMNR"

;

2. Determine E1 Configuration Choices

3. To Edit E1 Configuration

ED-E1:tid:aid:ctag:::[DLCID=dlcid],[OMODE=omode];

Example: Set E1 #3 Circuit ID to WB6-E1-03.

ED-E1:tid:E1-03:ctag:::DLCID=WB6-E1-03;

4. To Enter E1 Configuration and Put In Service

ENT-E1:tid:aid:ctag:::[DLCID=dlcid],[OMODE=omode];

Example:

Create E1 #3 with Circuit ID set to WB6-E1-03 and place in service.

ENT-E1:tid:E1-03:ctag:::DLCID=WB6-E1-03;

If PST= Your choice is

IS-EQ

IS-RLY

IS-UEQ

Edit a parameter while in service.

ED-E1:tid:aid:ctag:::[DLCID=dlcid],[OMODE=omode];

Place a facility out of service.

RMV-E1:tid:aid:ctag;

OOS-EQ

OOS-RLY

OOS-UEQ

Edit a parameter while out of service

ED-E1:tid:aid:ctag:::[DLCID=dlcid],[OMODE=omode];

Enter (grow) a facility and place in service (ENT-E1)

RMV-E1:tid:aid:ctag;

AIDType AID

E1 E1-01 to E1-27, or ALL

(see T3-E1 Configuration

AIDs on page 8)

PST