User manual

22 Wide Bank 28 DS3 - Release 2.4

T1 Circuit Configuration

1. Retrieve Current T1 Configuration

RTRV-T1:tid:aid:ctag;

Example: Retrieve current configuration for

DS1 #2.

RTRV-T1:tid:DS1-02:ctag;

Response: tid 2001-12-04 11:51:58

M ctag COMPLD

"DS1-02::AISF=Y,CMDMDE=FRCD,DLCID=DS1 2,

FLMDE=BOTH,FMT=UNFR,IDLE=AIS,LBO=1,LINECDE=B8ZS,

OMODE=NORM,RVRTFLAG=UNLCKD:IS-EQ,NALMNR"

;

2. Determine T1 Configuration Choices

3. To Edit T1 Configuration

ED-T1:tid:aid:ctag:::[DLCID=dlcid],[LBO=lbo],[LINECDE=linecde],[OMODE=omode];

Example: Set DS1 #8 Line Code to AMI.

ED-T1:tid:DS1-08:ctag:::LINECDE=AMI;

4. To Enter T1 Configuration and Put In Service

ENT-T1:tid:aid:ctag:::[DLCID=dlcid],[LBO=lbo],[LINECDE=linecde],[OMODE=omode];

Example: Create DS1 #8 with Line Code set to AMI and place in service.

ENT-T1:tid:DS1-08:ctag:::LINECDE=AMI;

If PST= Your choice is

IS-EQ

IS-RLY

IS-UEQ

Edit a parameter while in service:

ED-T1:tid:aid:ctag:::t1_parameters];

Place a facility out of service:

RMV-T1:tid:aid:ctag;

OOS-EQ

OOS-RLY

OOS-UEQ

Edit a parameter while out of service:

ED-T1:tid:aid:ctag:::t1_parameters];

Enter (grow) a facility and place in service:

ENT-T1:tid:aid:ctag:::t1_parameters];

AIDType AID

T1 DS1-1 to DS1-28, or ALL

Note: Most T1 commands

support lists and ranges

PST