User manual

14 Wide Bank 28 DS3 - Release 2.4
Present State Definitions (PST)
2. Retrieve T1 or E1 Present State
RTRV-T1:tid:aid:ctag;
RTRV-E1:tid:aid:ctag;
Example: Retrieve the current configuration, including the PST and SST values, for E1 #2.
RTRV-E1:tid:E1-02:ctag;
Example: Retrieve the current configuration, including the PST and SST values, for DS1 #2.
RTRV-T1:tid:DS1-02:ctag;
The following response shows the default DS1 configuration values (see T1 Circuit
Configuration on page 22).
tid 2001-12-04 11:51:58
M ctag COMPLD
"DS1-02::AISF=Y,CMDMDE=FRCD,DLCID=DS1 2,
FLMDE=BOTH,FMT=UNFR,IDLE=AIS,LBO=1,LINECDE=B8ZS,
OMODE=NORM,RVRTFLAG=UNLCKD:IS-EQ,NALMNR"
;
Keyword Description
aid Access ID depends on facility type:
• For T1 facility, use DS1-1 to DS1-28, or ALL
• For E1 facility, use E1-01 to E1-27, or ALL
(see T3-E1 Configuration AIDs on page 8)
Note: This command supports aid lists and ranges (&, &&).
ctag Correlation Tag (optional)
tid Target ID of network element (optional)
PST SST