User manual

Wide Bank 28 DS3 - Release 2.4 13

Present State Definitions (PST)

1. Retrieve T3 Present State

NOTE: The T3 facility’s Present State value is always in service and equipped (IS-EQ).

RTRV-T3:tid:[aid]:ctag;

Example: Retrieve current DS3 configuration.

RTRV-T3:tid::ctag;

The following response shows the default DS3 configuration values (see T3 Circuit

Configuration on page 18).

Response: tid 2001-12-4 11:43:56

M ctag COMPLD

"AISC=LOS&AISNAS&LOF,AIST=ONES,CKTID=DS3,

CMDMDE=FRCD,FMT=M23,IDLE=N,LBO=1,LINECDE=B3ZS,

MCOND=LOS&RAI&AISNAS&LOF&T-ERL&RTCLK&IMPROPRMVL&

IRR&CONTEQPT&BPV,OMODE=NORM,XBIT=PASS,XBITRCV=ALM1,

XPOL=ALM1,TMG=INT,TMGLOCK=N"

;

Keyword Description

aid Access ID (optional). If omitted, it will default to ALL.

• ALL

ctag Correlation Tag (optional)

tid Target ID of network element (optional)