User manual

12 Wide Bank 28 DS3 - Release 2.4
Log-In/Log-Out Commands
5. Set User Session Timeout
This command is used by the system administrator to set the number of minutes before session inactivity
timeout of the TL1 TCP/IP port. When the command is issued, any active sessions will be updated with the
new session timeout period. Setting the tmout parameter to zero will turn off session inactivity timeouts so
that sessions will never time out.
This command does not affect TL1 sessions using the TL1 RS-232 port or any CLI sessions using TCP/IP
or RS-232.
SET-ATTR-SECUDFLT:tid::ctag::TMOUT=<tmout>;
Example: SET-ATTR-SECUDFLT:tid::ctag::TMOUT=15;
Keyword Description
tmout Timeout period in minutes.
• Any positive integer value.
• A zero value will disable timeout.
• Default value is 31.