User manual

Index
Wide Bank 28 DS3 - Release 2.4 July 2004 Index-5
Framing and Loop Timing, Testing
................. 7-32
Framing Formats
................................................ 3-3
Idle Code to Network
......................................... 2-9
Input Port
...........................................................2-2
Interfaces, Testing
............................................ 7-32
Line Code
........................................................... 3-3
Line Loopback
................................................. 2-32
Line Loopback with C-bit Framing
.................7-36
Line Loopback with M23 Framing
..................7-35
Line Rate
............................................................3-3
Loopup Network with PRBS BERT
................ 7-17
Manual Switch Test
......................................... 7-40
Multiframe Structure
......................................... 2-9
Near-End with Loopback Tests, Testing the
... 7-35
Network Protection Test
.................................. 7-42
Non-Redundant Test Setup
.............................. 7-32
Path Maintenance Data Link
............................. 7-7
Path Maintenance Data Link, Functional
Description of
...................................... 7-7
Payload Loopback
........................................... 2-33
Payload Loopback with C-bit Framing
............7-36
Payload Loopback with M23 Framing
............7-36
Ports
........................................................... 1-3, 1-4
Processors
.......................................................... 2-4
Properties
......................................................... 9-91
Receive Sensitivity
............................................ 3-3
Redundancy Description
....................................2-2
Redundancy, Testing
....................................... 7-39
Revertive Switching Test
................................. 7-41
Test Setup
.............................................. 7-39, 7-42
Test with C-bit Framing
...................................7-33
Test with M23 Framing
...................................7-33
Tests with Line Timing
....................................7-34
Transmit Amplitude
........................................... 3-3
Transmit Jitter
....................................................3-3
DS3 Card Self-Test
.................................................7-12
DS3 CIRCUITID
.................................................... 8-33
DS3 CLOCK
........................................................... 8-33
DS3 CLOCKREVERT
........................................... 8-34
DS3 EQUIPMENT
................................................. 8-34
DS3 EQUIPMENTID
............................................. 8-35
DS3 FACILITYID
..................................................8-35
DS3 FRAMEID
......................................................8-35
DS3 FRAMING
...................................................... 8-36
DS3 GENNUMBER
...............................................8-36
DS3 LENGTH
........................................................ 8-37
DS3 LINE
............................................................... 8-37
DS3 LOCATIONID
................................................ 8-37
DS3 LOOPDETECT
...............................................8-38
DS3 PAYLOAD
..................................................... 8-38
DS3 PM THRESHOLD
.......................................... 8-39
DS3 PORTNUMBER
............................................. 8-41
DS3 PROTECT
...................................................... 8-41
DS3 Self-Test, Alarm Severity
............................... 8-11
DS3 SEND
............................................................. 8-42
DS3 THRESHOLD
................................................ 8-42
DS3 UNIT
.............................................................. 8-43
DSU
.............................................................. Glossary-2
DSX-1
....................................... Glossary-2, Glossary-8
Cable Part Number
............................................ 5-7
DSX-3
....................................... Glossary-2, Glossary-8
DTE
.............................................................. Glossary-2
E
E1 .............................................. Glossary-2, Glossary-8
Connector Pinout
...............................................A-4
Line Coding
................................................1-4, 2-3
Line Rate
........................................................... 3-4
Ports
................................................................... 1-3
Properties
......................................................... 9-90
Transmit Amplitude
.......................................... 3-4
Transmit Jitter
................................................... 3-4
Transmit Pulse Shape
........................................ 3-4
ECSA
............................................................ Glossary-2
ED-<AIDType>
...................................................... 9-29
ED-DAT
................................................................. 9-31
ED-PID
................................................................... 9-31
ED-USER-SECU
.................................................... 9-32
Electronics
and Network Protection
................................... 2-19
and Network Protection, Testing
..................... 7-42
Protection Mode
.....................................2-17, 2-18
Protection Test, DS3
....................................... 7-43
Protection, Testing
.......................................... 7-39
Electrostatic Discharge Guidelines
............................vii
ENT-<LSType>
...................................................... 9-33
Enterprise MIB
......................................................... 1-8
ENT-USER-SECU
................................................. 9-34
Environment Access Identifier (EnvAID)
.............. 9-91
Environment Requirements
...................................... 4-3
EQUIPMENT
......................................................... 8-43
Equipment
Command
.......................................................... 6-6
Loopback, DS1
................................................ 7-20
Loopback, DS3
................................................ 7-35
Parameters
....................................................... 9-92
Error
C-bit parity
...................................................... 2-34
Far-End Block
................................................. 2-34
P-bit parity
....................................................... 2-34
Error Message
Invalid Equipment Parameter Value
............... 9-92