User manual

SNMP
SNMP Traps Supported by Wide Bank 28 DS3
11-8 July 2004 Wide Bank 28 DS3 - Release 2.4
Enterprise Traps
DS3 Controller State Trap
The ds3ControllerStateTrap is an enterprise-specific trap that indicates a change in the DS3
Controller’s alarm state.
The Trap-PDU contains two variable bindings: ds3amControllerStatus, ds3ControllerIndex.
The first variable indicates the value of the Controller Status leaf for the affected Controller.
The second variable indicates the primary or secondary DS3 Controller.
DS1 Card State Trap
A ds1CardStateTrap indicates a change in the DS1/E1 card’s alarm state.
The Trap-PDU contains two variable bindings: ds3amDS1CardStatus, ds3amDS1CardIndex.
The first variable indicates the value of the DS1/E1 Card Status leaf for the affected DS1/E1
Card. The second variable indicates the DS1/E1 card number.
Failed CLI Login Trap
The cliLoginFailureTrap is an enterprise-specific trap that is issued when there are three
consecutive unsuccessful attempts to login to the CLI.
There are no variables bound to this trap, so the only information provided by the trap is the IP
of the Wide Bank that experienced the login failures and the time the last failure occurred.
Power Status Trap
The ext48VPowerStatusTrap is an enterprise-specific trap that is issued whenever an “external
48V power source low or missing” event occurs or is cleared.
The Trap-PDU contains two variable bindings: ds3amEnvExternalPowerStatus,
ds3amEnvPowerSupplyIndex. The first variable indicates either normal(1) or
lowOrMissing(2). When the low or missing event occurs, the trap is sent and the value bound
to the trap is lowOrMissing. When the event is cleared, the value bound to the trap is normal.
The second variable indicates the power supply number.
DS1 Protect Switch Trap
The ds1ProtectSwitchTrap is an enterprise-specific trap that indicates when a DS1/E1 facility
is switched to the spare card. This trap is sent with the DS1/E1 line index number bound to it.
DS1 Move Home Trap
The ds1MoveHomeTrap is an enterprise-specific trap that indicates when a DS1/E1 facility is
switched to its home card from the spare card. This trap is sent with the DS1/E1 line index
number bound to it.