User manual

Wide Bank 28 DS3 - Release 2.4 July 2004 9-101

TL1 Commands and Messages

TL1 Automatic Messages

 Report Alarm Message Format ... 9-101

 Report Event Message Format ... 9-104

 Report Alarm Clear Message Format ... 9-103

 Report Performance Monitoring Message Format ... 9-105

 Cancel User Session Event Message Format ... 9-106

 Message Summary Table ... 9-106

The Wide Bank 28 DS3 automatically reports alarms and events to the network management system.

The Wide Bank provides default values for the severities assigned to these alarms and events. However,

you can change the notification code (ntfcncde) of many alarm and events in order to alter their severity

or to prevent them from being automatically reported (see SET-ATTR-<AIDType> on page 9-75).

NOTE: Notification codes can only be changed through the TL1 interface.

Report Alarm Message Format

Syntax:

^^^<tid>^<YY-MM-DD>^<HH:MM:SS><cr><lf>

^^^"<aid>:<ntfcncde>,<condtype>,<srveff>,

<ocrdat>,<ocrtm>,<locn>,<dirn>,:

\"<description>\"<aiddet>,"

;

Example:

tid 2001-08-04 11:51:58\

* atag REPT ALM EQPT

"DS1-07:MN,INT,NSA,11-14,01-01-40,,:

\"Internal hardware fault or failure\","

;

Field Description

^ Space character

cr Carriage Return character

lf Line Feed character

aid Access ID used to identify trouble interface