User manual

TL1 Commands and Messages
TL1 Parameter Descriptions
9-94 July 2004 Wide Bank 28 DS3 - Release 2.4
Memory <frommem> and <tomem>
From Memory <frommem> specifies the data area from which memory is to be copied, while To
Memory <tomem> specifies data area where memory is to be copied to.
Message Type <msgtype>
This parameter specifies the type of autonomous message to be retrieved.
Monitor Date <mondat>
This parameter specifies the starting date of the performance monitoring (PM) or storage register
period defined with the <tmper> variable.
Monitor Level <monlev>
This parameter specifies the discriminating level for the requested monitored parameter. The Wide
Bank currently supports only 1-UP, which means it will report any performance statistics that do
not have a value of zero.
Monitor Time <montm>
This parameter specifies the starting time of the performance monitoring (PM) or storage register
period defined with the <tmper> variable.
Code Description
ACTIVE Specifies memory area in active Controller
CONFIG Specifies configuration memory area
STANDBY Specifies memory area in standby Controller
TEMP Specifies temporary memory area
Type Description
ALM Alarm
DBCHG Database Change
EVT Event
LOG Log
PM Performance Monitory