User manual

TL1 Commands and Messages
TL1 Parameter Descriptions
9-92 July 2004 Wide Bank 28 DS3 - Release 2.4
Equipment Parameters
Error Message: Invalid Equipment Parameter Value
tid 2001-08-04 13:18:00
M ctag DENY
INUP
/* Invalid Payload block. Invalid name value field. */
;
Error Message: Invalid Test Session Number
Test session numbers are not supported.
Location of Alarm or Condition <locn>
This parameter indicates the location of the alarm condition.
Error Response: Invalid Location
tid 2001-08-04 11:51:58
M ctag DENY
INUP
/* Invalid Payload block. Invalid positional field. */
;
Field Description and Possible Values
ID Equipment ID: Up to 20 ASCII characters.
TMG Timing Source:
• INT – Internal clocke
• EXT – External Clock, Slave to DS3 Line
• LINE – Slave to DS3 Line
Identifier Description
FEND Far End: At a Distant Entity connected to the Identified Entity
NEND Near End: At the Identified Entity