User manual

Wide Bank 28 DS3 - Release 2.4 July 2004 9-87
TL1 Commands and Messages
TL1 Parameter Descriptions
Completion Codes
Condition Description <conddescr>
This is detailed text description of the condition. It is up to 64 characters long and enclosed with a
pair of escaped quotes.
Condition Effect <condeff>
This is the effect of the condition on the system.
Condition Type <condtype>
This parameter describes the type of alarm, event or condition. This field is represented by
<condtype>.
Alarmed Condition Types
Code Description
COMPLD Command received, executed, and completed.
DENY Execution denied.
PRTL Command received but only partially executed.
RTRV Completion code of multiple responses to RTRV commands. The
final response should have the COMPLD completion code.
Condition Code Description
CL Clear – the condition effect used to clear standing conditions.
SC Standing Condition – an event that must be cleared.
TC Transient Condition – does not need clearing. It happens and then it is
over.
Condition Description
ACTLPBK Loopback send code is Active
AISNAS Alarm Indication Signal – North American Standard
BER-SD Bit Error Rate – Signal Degrade
BER-SF Bit Error Rate – Signal Failure
CLFAN Cooling Fan failure
CONTEQPT Control Equipment failure
FAILTOSW Failure to Switch to protection