User manual

Wide Bank 28 DS3 - Release 2.4 July 2004 9-83
TL1 Commands and Messages
TL1 Parameter Descriptions
TL1 Parameter Descriptions
 Access Identifier <aid> ... 9-84
 Access Identifier Types <AIDType> ... 9-85
 Additional Access Identifier Information
<aiddet> ... 9-86
 Alarm Code <almcde> ... 9-86
 Alarm Message <almmsg> ... 9-86
 ATAG Segment <atagseg> ... 9-86
 Automatic Message Tag <atag> ... 9-86
 Command Mode <cmdmde> ... 9-86
 Completion Codes ... 9-87
 Condition Description <conddescr> ... 9-87
 Condition Effect <condeff> ... 9-87
 Condition Type <condtype> ... 9-87
 Correlation Tag <ctag> ... 9-89
 Data Segment <data_seg> ... 9-89
 Date <date> ... 9-89
 Direction of Alarm or Condition <dirn> ... 9-89
 DS1/E1 Properties ... 9-90
 DS3 Properties ... 9-91
 Environment Access Identifier (EnvAID) ...
9-91
 Equipment Parameters ... 9-92
 Location of Alarm or Condition <locn> ... 9-92
 Log Identifier <lognm> ... 9-93
 Loopback Type <lpbktype> ... 9-93
 Memory <frommem> and <tomem> ... 9-94
 Message Type <msgtype> ... 9-94
 Monitor Date <mondat> ... 9-94
 Monitor Level <monlev> ... 9-94
 Monitor Time <montm> ... 9-94
 Monitored Parameter Type <montype> ... 9-95
 Notification Code <ntfncde> ... 9-96
 Number of Reports <numrept> ... 9-96
 Occurrence Date <ocrdat> ... 9-96
 Occurrence Time <ocrtm> ... 9-96
 Phase <ph> ... 9-96
 Private Identifier <pid> ... 9-97
 Reporting Interval <reptinvl> ... 9-97
 Reporting Start Time <reptstatm> ... 9-97
 Restoration Function Codes ... 9-97
 Security Alarm Type <secualmtype> ... 9-97
 Service Effect of Alarm or Condition <srveff>
... 9-98
 Target Identifier <tid> and Source Identifier
<sid> ... 9-98
 Threshold Level <thlev> ... 9-98
 Time <time> ... 9-99
 Time Offset <tmofst> ... 9-99
 Time Period <tmper> ... 9-99
 Type or Request <typereq> ... 9-99
 User Access Privilege <uap> ... 9-99
 User Identifier <uid> ... 9-100