User manual

Wide Bank 28 DS3 - Release 2.4 July 2004 9-81
TL1 Commands and Messages
TL1 Command List
Example: SW-TOPROTN-T1:tid:DS1-5:ctag;
Move DS1 #5 to Spare Card.
SW-TOWKG-<FacilityType>
Name: Switch To Working
Purpose: Instructs the Wide Bank to switch to the T3 Controller in slot A, or to move a DS1
channel to its home card.
NOTE: If you switch T3 Controllers, your TL1 session will be terminated.
Category: Transport Surveillance Commands
Security: RW
Syntax: SW-TOWKG-{T3|T1|E1}:[<tid>]:[<aid>]:[<ctag>];
Example: SW-TOWKG-T3:tid:ALL:ctag;
Switch to Working Controller.
Example: SW-TOWKG-T1:tid:DS1-5:ctag;
Move DS1 #5 Home.
Field Description
aid Access ID depends on FacilityType:
• For T3, use ALL
• For T1, use DS1-1 to DS1-28
• For E1, use E1-1 to E1-27
ctag Correlation Tag (optional)
tid
Target ID of network element (optional)