User manual

TL1 Commands and Messages
TL1 Command List
9-80 July 2004 Wide Bank 28 DS3 - Release 2.4
STA-LOCL-RST
CAUTION! THE RESTORATION COMMAND WILL DISRUPT SERVICE.
Name: Start Local Restoration
Purpose: Instructs the Wide Bank to restore the configuration parameters to their default values.
Category: Transport Surveillance Commands
Security: RW
Syntax: STA-LOCL-RST:[<tid>]::[<ctag>];
Example: STA-LOCL-RST:tid::ctag;
SW-TOPROTN-<FacilityType>
Name: Switch To Protection
Purpose: Instructs the Wide Bank to switch to the standby T3 Controller in slot B, or to move a
DS1 channel to the spare card.
NOTE: If you switch T3 Controllers, your TL1 session will be terminated.
Category: Transport Surveillance Commands
Security: RW
Syntax: SW-TOPROTN-{T3|T1|E1}:[<tid>]:[<aid>]:[<ctag>];
Example: SW-TOPROTN-T3:tid:ALL:ctag;
Switch to Protection Controller.
Field Description
ctag Correlation Tag (optional)
tid
Target ID of network element (optional)
Field Description
aid Access ID depends on FacilityType:
• For T3, use ALL
• For T1, use DS1-1 to DS1-28
• For E1, use E1-1 to E1-27
ctag Correlation Tag (optional)
tid
Target ID of network element (optional)