User manual

Wide Bank 28 DS3 - Release 2.4 July 2004 9-79
TL1 Commands and Messages
TL1 Command List
SET-TH-<FacilityType>
Name: Set Threshold Value
Purpose: Sets the threshold for supported performance monitored facility types. If threshold is
exceeded, a threshold crossing alert will be sent.
Category: Transport Surveillance Commands
Security: RW
Syntax: SET-TH-{T3|T1|E1}:[<tid>]:[<aid>]:[<ctag>]::
[<montype>],<thlev>,,,<tmper>;
Example: SET-TH-T3:tid:ALL:ctag::CVL,100,,,15-MIN;
Field Description
aid Access ID depends on selected Facility Type:
• For T3, use DS3-A, DS3-B, or ALL
• For T1, use DS1-1 to DS1-28, or ALL
• For E1, use E1-1 to E1-27, or ALL
• Null defaults to ALL
ctag Correlation Tag (optional)
montype
The type of performance monitoring statistic the threshold exists for:
• For T3s, values are: CVL, ESL, LOSS-L, SESL, CVP-P, ESP-P,
SESCP-P.
• For T1s and E1s, values are CVL and ESL.
tid
Target ID of network element (optional)
thlev Threshold Level, an integer value between 0 and (2^31)-1, a range
from zero to more than 2 billion. If the number monitored for the
performance type exceeds the threshold value for the given time
period, a threshold crossing alert will be generated. If the value is
zero, no threshold crossing alerts will be generated.
tmper Time period that these statistics were gathered