User manual

TL1 Commands and Messages
TL1 Command List
9-78 July 2004 Wide Bank 28 DS3 - Release 2.4
SET-SID
Name: Set System Identification
Purpose: Set the TL1 network identification of the Wide Bank.
Category: Memory Administration Commands
Security: RWA
Syntax: SET-SID:[<tid>]::[<ctag>]::<newSID>;
Example: SET-SID:tid::ctag::WB-1;
Set new SID to WB-1.
Response: tid 2002-01-05 11:23:48
M ctag COMPLD
;
The first response following the SET-SID command will display the original tid so that
the response can be matched to the command. Subsequent commands and responses
will use the new tid.
Field Description
ctag Correlation Tag (optional)
newSID New System Identification: Up to 20 alphanumeric or hyphen
characters
tid
Target ID of network element (optional)