User manual

Wide Bank 28 DS3 - Release 2.4 July 2004 9-71
TL1 Commands and Messages
TL1 Command List
RTRV-TH-<FacilityType>
Name: Retrieve Threshold Value
Purpose: Instructs the Wide Bank to return the threshold value, that when crossed, will issue a
threshold crossing alert.
Category: Transport Surveillance Commands
Security: R
Syntax: RTRV-TH-{T3|T1|E1}:[<tid>]:[<aid>]:[<ctag>]::
[<montype>],,[<tmper>];
Response Format:
tid 2001-08-04 11:51:58
M ctag COMPLD
"<aid>:<montype>,,,<thlev>,<tmper>"
;
Field Description
aid Access ID. Omitting the field defaults to ALL.
ALL is a valid value for any facility type.
For T3, the aid can be ALL only or omitted.
For T1, the aid can be a single DS1, a list of DS1s, or a range
of DS1s.
For E1, the aid can be a single E1, a list of E1s, or a range of E1s.
ctag Correlation Tag (optional)
montype
The type of performance monitoring statistic the threshold exists for:
For T3s, values are: CVL, ESL, LOSS-L, SESL, CVP-P, ESP-P,
SESCP-P.
For T1s and E1's values are CVL and ESL. If omitted, the field
defaults to ALL.
tid
Target ID of network element (optional)
tmper Time period that these statistics were gathered
Field Description
aid Access ID
montype
The type of performance monitoring statistic the threshold exists for
thlev Threshold Level, an integer value between 0 and (2^31)-1, a range
from zero to more than 2 billion.
tmper Time period that these statistics were gathered