User manual

TL1 Commands and Messages
TL1 Command List
9-68 July 2004 Wide Bank 28 DS3 - Release 2.4
locn Location:
• NEND – near end
• FEND – far end
monlev Monitor Level specifies the discriminating level for the requested
monitored parameter. Currently, the Wide Bank only supports
1-UP, which means we will report and performance statistics that do
not have a value of zero.
montype Monitored Type. Values are:
• CSS – Control Slip Seconds count
• CVL – Coding Violation count – Line. This montype supports
Threshold Cross Alerts on the DS1s and DS3.
• CVP-P – Coding Violation count – Path. This montype supports
Threshold Cross Alerts on the DS3 only.
• DGRML – Degraded Minute count – Line
• ESL – Errored Second count – Line
• ES-LFE – Errored Second count – Line, Far End
• ESP-P – Errored Second count Path – P-bit parity. This montype
supports Threshold Cross Alerts on the DS3 only.
• LOSS-L – Loss of Signal Seconds count – Line
• PSC – Protection Switching Count
• PSD – Protection Switching Duration in seconds
• SESCP-P – Severely Errored Second count – Path, DS3 CP-bit
parity. This montype supports Threshold Cross Alerts on the DS3
only.
• SEFS – Severely Errored Framing Second count
• SESL – Severe Errored Second count – Line. This montype
supports Threshold Cross Alerts on the DS3 only.
• SES-LFE – Severe Errored Second Count – Line, Far End
• UASL – Unavailability Second count – Line
• UAS-LFE – Unavailability Second count – Line, Far End
numrept The number of reports the user would like scheduled. A value of zero
turns reports off. Otherwise, reports are sent every reporting interval
and the number of reports is decremented. Even if reporting is
inhibited (see INH-PMREPT-<FacilityType> on
page 9-38), the
number will continue to be decremented. If the numrept value is
omitted from the command, the Wide Bank will report every
reporting interval indefinitely until another schedule command is
issued.
reptinvl Reporting Interval specifies how often reports are to be generated and
sent:
•15-MIN
•1-HR
• 1-DAY
Omitting this field defaults to 15-MIN.
Field Description