User manual

TL1 Commands and Messages

TL1 Command List

9-66 July 2004 Wide Bank 28 DS3 - Release 2.4

Response Format:

^^^<sid>^<YY-MM-DD>^<HH:MM:SS><cr><lf>

A^^<atag>^REPT^PM^<FacilityType>

^^^"[<FacilityId>]:<montype>,<monval>,[<vldty>],

[<locn>],[<dirn>],[<tmper>],[<mondat>],[<montm>]"

;

Field Description

FacilityType T1, E1, T3

FacilityID Facility ID depends on Facility Type:

• For T1, values are DS1-1 to DS1-28

• For E1, values are E1-1 to E1-27

• For T3, values are DS3-A, DS3-B

atag Automatic message tag. A sequential value is assigned to each

message by the Wide Bank. Receiving a non-sequential value

indicates that some messages have been lost.

dirn Direction of traffic:

•TRMT – transmit

• RCV – receive

locn Location:

• NEND – near end

• FEND – far end

mondat Date during which the time period started

montm Time during which the time period started

montype Monitored parameter type

monval Monitor Value

sid Source Identifier

tmper Time period that these statistics were gathered

• 15-MIN – 15 minutes

• 1-HR – 1 hour

• 1-DAY – 1 day

vldty Validity

• COMPL – complete

• PRTL – partial period