User manual

TL1 Commands and Messages
TL1 Command List
9-64 July 2004 Wide Bank 28 DS3 - Release 2.4
RTRV-PM-<FacilityType>
Name: Retrieve Performance Monitoring Data
Purpose: Retrieves performance monitoring statistics.
Category: Transport Surveillance Commands
Security: R
Syntax: RTRV-PM-{T3|T1|E1}:[<tid>]:[<FacilityID>]:
[<ctag>]::[<montype>],[<monlev>],[<locn>],,
[<tmper>],[<mondat>],[<montm>];
Example: RTRV-PM-T1:tid:ALL:ctag::,,,,15-MIN,,;
Retrieve PM for all DS1s at 15-minute intervals, as shown below:
Field Description
FacilityID Facility ID depends on selected Facility Type:
• For T3, use DS3-A, DS3-B, or ALL
• For T1, use DS1-1 to DS1-28, or ALL
• For E1, use E1-1 to E1-27, or ALL
ctag Correlation Tag (optional)
locn Location of the statistics: NEND or null
mondat Date during which the time period started
monlev Level that must be monitored to be reported: 1-UP or null
montm Time during which the time period started
montype Monitored parameter type: ALL or null
tid
Target ID of network element (optional)
tmper Time period that these statistics were gathered