User manual

TL1 Commands and Messages
TL1 Command List
9-56 July 2004 Wide Bank 28 DS3 - Release 2.4
RTRV-ATTR-<AIDType>
Name: Retrieve Attribute
Purpose: Instructs the Wide Bank to return the notification code associated with the specified
alarm or event. The notification code determines whether an event is alarmed and the
severity assigned to the alarm or event. All alarm and event conditions (condtype) have
default severities for notification conditions (ntfcnde) but most severities can be
changed by the user. The assigned severities apply to alarms and events reported in the
CLI and TL1 alarm messages and by the alarm LED indicators and alarm output
contacts on the unit.
 This command does not retrieve environment (ENV) conditions.
 Severities can be assigned by the command SET-ATTR-<AIDType> on page 9-75.
 Critical (CR), Major (MJ), and Minor (MN) alarms are reported by REPT ALM
messages (see
TL1 Automatic Messages on page 9-101).
 Not Alarmed (NA) events are reported by REPT EVT messages (see TL1 Automatic
Messages on
page 9-101).
 Not Reported (NR) events can be retrieved by the RTRV-COND command (see
RTRV-COND-<AIDType> on page 9-59).
Category: Transport Surveillance Commands
Security: R
Syntax: RTRV-ATTR-{T3|T1|E1|EQPT}:[<tid>]:[<aid>]:[<ctag>]::
<ntfcncde>,<condtype>,<locn>,<dirn>,<tmpr>;